GENUINE MIDWEST MOUNTAIN ENGINEERING
We are that confident in the quality That SMX will offer Lifetime warranty on all Midwest levers... If you snap it we replace it.*
(Though in 4 years we have never had a lever break.)
*
FULL RANGE IN STOCK READY FOR NEXT DAY SHIPPING
Midwest Mountain Engineering Clutch and Brake Levers Designed for the KTM Dirt Bike, but with applications on many Husaberg, GasGas, Husqvarna, Beta and Sherco and TM dirt bikes, the primary advantage of this lever is a 50% reduction in actuation force.
This means less fatigue, less arm pump and more endurance especially during high intensity race conditions.
A "shorty" lever length allows a one or two finger operation enabling you to squeeze the lever to the bar without releasing your grip with the rest of your fingers.
Depending on the mounting position you employ, you can even go for a three finger grab when necessary.
The ball on the lever end meets AMA safety rule requirements and provides a comfortable grip reference for your fingers; it also helps prevent accidental release while traversing rough terrain at high speed.
The width of the lever distributes the contact pressure over a greater surface area on your fingers reducing load concentrations that induce blistering.
Application Guide below.
Please visually confirm which lever your bike is fitted with , as manufacturers switched between Brembo and Magura. Or give us a call and we can advise on correct levers - 01495 774575 or +447939934511
POPULAR MODEL APPLICATION:
KTM EXC 2017-2024 - BREMBO - B2C Clutch Lever + B2B Brake Lever
Husky TE 2017-2024 - MAGUARA - M2C Clutch Lever + M1B Brake Lever
Husky TE 2022.5-24 - BRAKTEC - BT1C Clutch Lever + BT1B Brake Lever
(Husky changed the Braktec on late 2022 models)
(Husky 2024 Pro version fitted with Brembo same as KTM)
GasGas Ec 2021-2024 - BRAKTEC - BT1C Clutch Lever + BT1B Brake Lever
Beta RR/XT 2010-2024 - BREMBO - B2C Clutch Lever (Brake Lever not available)
BREMBO & BRAKTEC CAN BE UPGRADED TO PRO VERSION WITH FINGER ADJUSTER
(MAGURA CANNOT BE UPGRADED)
List below is a guide only
Clutch Lever application guide:
BREMBO B2C CLUTCH LEVER
KTM ’16-24 125/150 SX/XC/XCW
KTM ’06-24 250/300 XC/SX/XCW/EXC/6D
KTM ’11-24 350 XCF/XCWF/EXCF/SXF/6D
KTM ’09-10 400 XCWF/EXCF
KTM ’07-24 450 XCF/SXF/XCWF/EXCF
KTM ’12-24 500 XCFW/EXCF/6D
KTM ’08-11 530 XCFW/EXCF
Husqvarna ’14-16 125-501 TE/TC/FE/FC (except ’16 FC & ’16 TC 125)
Husaberg ’11-14 125-570 FE/FX/TE
Beta ’10-24 All Models
Sherco All years and all models with Brembo clutch master cylinders
TM '08-24 All models with Brembo clutch master cylinders
*
BRAKTEC BT1C CLUTCH LEVER:
The BT1C lever is compatible with both Braketec clutch and brake master cylinders
(You can uses this lever on both clutch and brake)
GASGAS 2021-2024
HUSQVARNA 2022.5-2024 (2024 pro model uses brembo)
*
MAGURA M2C CLUTCH LEVER:
KTM 09-15 125/150 SX/XC/EXC
KTM 09-20 200 XCW/EXC
KTM 13-20 690 E/R
Husqvarna 16 FC 250/350/450
Husqvarna 17-22 125-501 TE/TC/TX/FE/FC/FX
Husqvarna 16-22 701 Enduro/SM
*
MAGURA M1C CLUTCH LEVER:
KTM 04-12 65/85/105 SX/XC
KTM 04-08 125/144 SX/XC/EXC
KTM 04-08 200 XCW/EXC
KTM 04-05 250/300 SX/XC/XCW/EXC
KTM 04-08 400 XCFW/EXCF
KTM 04-06 525 SX/XC/EXC/XCW
KTM 07-12 690 E/RKTM 04-09 950
KTM 07-13 990
Complete your handle bar controls with a matching brake lever.
This lever utilizes the stock pivot geometry so the action is the same as a stock brake lever.
The difference is that the brake lever is the same "shorty" length as the CLever clutch levers and has the same ergonomic feel of the wide blade.
These features allow you to use a one or two fingered grip on the lever with either a short or long reach.
You can maintain a tight grip on your bars using your remaining fingers with no danger of trapping them in between the blade and the bar in a panic grab situation.
Brake Lever application Guide:
BREMBO B2B BRAKE LEVER
KTM 14-23 125-500 All Models
Husqvarna 14-17 125-501 TE/TC/TX/FE/FX – Brembo Brakes
Sherco - All Models with Brembo master cylinders
TM - 08-23 All models with Brembo brake master cylinders
MAGURA M1B BRAKE LEVER
HUSKY TC125 2018
HUSKY FC250 2018
HUSKY FC350 2018
HUSKY FC450 2018
HUSKY TE125 18-22
HUSKY TE250 18-22
HUSKY TE300 18-22
HUSKY TC250 18-22
HUSKY FE250 18-22
HUSKY FE350 18-22
HUSKY FE450 18-22
HUSKY FE501 18-22
BRAKTEC BT1B BRAKE:
The BT1B lever is an extra shorty lever compatible with both Braktec clutch and brake master cylinders
GASGAS 2021-2024
HUSQVARNA 2022.5-2024 (24 pro models used brembo)
- BREMBO B2C Clutch Lever £94.99
- BREMBO B2B Brake Lever £94.99
- BRAKETEC BT1C Clutch Lever £94.99
- BRAKETEC BT1B Brake Lever £94.99
- MAGURA M1C Clutch Lever £94.99
- MAGURA M2C Clutch Lever £94.99
- MAGURA M1B Brake Lever £94.99
- BREMBO/BRAKETEC PRO CLUTCH UPGRADE KIT £9.99
* Lifetime warranty for snapped lever body only. Warranty does not cover: damage to pins, bolts, springs, bushings, pro adjusters or general wear and tear
